Crossings
The sortiment of KATO UNITRACK has three electrical crossings. The left and the right crossing have a 15° angle with a length of 718 mm. The other crossing is a 90° crossing with a track length of 124 mm.
Crossings at a glance:
Possiblities for the representation of crossings
The crossings of KATO have a high reliability and durability. Adverse the other systems, KATO has a speciality. The electrical crossings haven't three cables (as alternating current), but the KATO turnouts have two-pole cable with direct current pole reversal basis.
The speciality of UNITRACK
A characteristic of the KATO turnouts are a pre-wired switch motor is factory installed into each UNITRACK turnout, they can be operated manually or from a remote position simply by plugging into a Turnout Control Switch. In the turnouts are extremely robust and passage-strong magnet
coil drive. By the specail construction, the turnouts remain very low and appear orginal accurate.
The electrical turnouts will be able by a two-pole connection cable supplied the electricity and the extension cable for turnouts will be extended. You can set many turnout switches together. For the first switch you need a detector,because you must transfer the alternating current of the transformer to a direct current.
Connection with turnout switch
The turnouts of KATO provided by a two-pole connection cable with direct current (DC). With the help of the KATO turnout-switch, the turnouts are electrically placed. Use exclusively this switch. With this product, you have troublefree enterprise.
KATO-turnouts are magnet article with one coil and are represented by pole reversal with direct current. Impulse contact switches don't therefore for magnet article with two coils other producers for example "Fleischmann", "Minitrix", Arnold etc. to be used!
WARNING: It's necessary, that a detector is installed between the transformer and the turnout, before you connect the turnout or the turnout switches on the transformer.
Detector for turnout switch
The detector (Art.No. 78503) will be connected on the corresponding exit of the transformer (brown/white). This product changed the alternating current of the transformer in direct current.
The sortiment of KATO UNITRACK has three electrical crossings. The left and the right crossing have a 15° angle with a length of 718 mm. The other crossing is a 90° crossing with a track length of 124 mm.
Crossings at a glance:
| item number | account | |
| 1. | 78300 | Crossing Left 15°, 186 mm |
| 2. | 78301 | Crossing Right 15°, 186 mm |
| 3. | 78302 | Crossing 90°, 124 mm |
Possiblities for the representation of crossings
The crossings of KATO have a high reliability and durability. Adverse the other systems, KATO has a speciality. The electrical crossings haven't three cables (as alternating current), but the KATO turnouts have two-pole cable with direct current pole reversal basis.
The speciality of UNITRACK
A characteristic of the KATO turnouts are a pre-wired switch motor is factory installed into each UNITRACK turnout, they can be operated manually or from a remote position simply by plugging into a Turnout Control Switch. In the turnouts are extremely robust and passage-strong magnet
coil drive. By the specail construction, the turnouts remain very low and appear orginal accurate.
The electrical turnouts will be able by a two-pole connection cable supplied the electricity and the extension cable for turnouts will be extended. You can set many turnout switches together. For the first switch you need a detector,because you must transfer the alternating current of the transformer to a direct current.
Connection with turnout switch
The turnouts of KATO provided by a two-pole connection cable with direct current (DC). With the help of the KATO turnout-switch, the turnouts are electrically placed. Use exclusively this switch. With this product, you have troublefree enterprise.
KATO-turnouts are magnet article with one coil and are represented by pole reversal with direct current. Impulse contact switches don't therefore for magnet article with two coils other producers for example "Fleischmann", "Minitrix", Arnold etc. to be used!
WARNING: It's necessary, that a detector is installed between the transformer and the turnout, before you connect the turnout or the turnout switches on the transformer.
The detector (Art.No. 78503) will be connected on the corresponding exit of the transformer (brown/white). This product changed the alternating current of the transformer in direct current.
